Complete osmosis pump 100-300 gpd

A complete pump that increases the pressure in home reverse osmosis or nanofiltration systems.
The pump is intended for use in devices equipped with a membrane with a capacity of 100-300 gpd and a clean water tank.

The pump is equipped with pressure sensors (high and low), power supply, mounting plate, cables and connectors for 1/4″ cable.

The pump is assembled and complete. Connection instructions included.
It is recommended for installation in home reverse osmosis systems in which the supply pressure from the water supply network is lower than 2.8 bar.

Technical data:

Supply voltage: 24V
Max efficiency: 1.6 l/min
Feed water pressure: 1.5 – 3.0 bar
Current intensity: 1A
Transformer included: 240V, 50/60Hz, 1.5A
Connections: quick connectors for 1/4″ cable
The pump is placed on an installation plate – it can be screwed to any surface.
The pump is not suitable for continuous operation. The recommended maximum working time is 45 minutes per hour.

Adjustable high pressure sensor.
Below is a diagram of the pump installation in a standard reverse osmosis system.