Out of stock
I Agree that my E-mail id is used inorder to notify me when the products becomes Back In Stock
New two-outlet UV sterilizer model “Clear 2”. It is characterized by new technical solutions and a large and efficient power of the 36W filament. It is adapted to continuous operation 24/7. It can be used “under the cloud”, i.e. outside any roofing. The kit includes a set of fittings with different diameters.
The best design of 2020!
The lamp has a number of facilities and solutions that are not available in similar products from competitors. The whole has been patented by SunSun and tested by independent opinion makers.
Double water outlet:
The lamp has the ability to connect up to two water outlets. For what? You can direct the water stream at the cascade, fountain or other elements of water decoration and at the same time to the filter. Either create a fountain and waterfall or attach a mechanical and biological filter separately. The number of possibilities that the lamp gives you is considerable.
What if you don’t want to use the two outlets? No trouble! The set of fittings includes a dummy.
You won’t find such advantages elsewhere. And that’s not over yet.
Flow regulation in water outlets:
Another unique advantage: regulation of water flow at each outlet separately. From now on you can freely set the amount of water supplied at each outlet. Set the water flow to the fountain, cascade or filter precisely and freely.
A large screw forces the water to spin. And basically it causes water to literally flow around the UV-C lamp. Extending the water path inside the lamp increases sterilization efficiency.
Waterproof on all sides:
The lamp is devoid of any material that could rust inside. It is made entirely of glass, plastic or rubber and silicone gaskets. Therefore, the lamp can work for uninterruptedly long years in a pond, and even in marine aquariums.
In addition, the lamp has an IP44 dust and water tightness class. So she can work outside without having to cover her from the rain.
Filament for standard pins:
The filament has a standard spacing and pin arrangement defined as 2G11. You can easily find suitable filaments or replacements in various offers on the web.
Technical data and parameters:
– total power consumption: 40W
– UV lamp power: 36W
– recommended flow: 6000l / h
– minimum flow 1000l / h
– maximum flow: 12000l / h
– dedicated to the water hole 45000l / 45m3
– power cable length: 5 meters
– maximum water pressure 0.3Bar
– filament service life: 8000h
– pins / filament connection: standard 2G11
– dimensions: 50x20x16cm
– hose connectors with an inner diameter of 20mm x 25mm x 30mm x 35mm